Sewage Damage Cleanup: Restoration Of The Environment
The health of indoor occupants is the primary concern why a sewage damage cleanup of the environment must conform to specific procedures and guidelines. Adhering to said procedures eliminates pathogen borne microbes from causing a disease outbreak.
It is a must that sewage damage cleanup be started as soon as possible when the problem has been detected. Because the longer the dirty water from the sewer stay, the greater the damage is and the change for harmful microorganisms to develop. Before the initial procedures of sewage damage is started, indoor occupants and workers without the appropriate personal protective equipment or PPE should be evacuated until such time that the contaminated area has been cleaned and disinfected properly.
Workers who will be working within the affected and contaminated perimeter of the sewage backflow must at all times wear their rubber gloves, goggles and boots, along with a protective overall suit. It a wound was sustained during the actual cleanup, it should be reported without delay, so necessary steps could be taken to disinfect it and avoid any possible "cross-contamination" that could be transferred via material handling and contact with clean surfaces.
When the water has already been extracted, all areas and items affected should be cleaned correctly before a disinfectant is applied by using a sprayer. Disinfection during the performance of a sewage damage cleanup is not purported to have total sanitation result. The main goal for spraying a disinfectant is to minimize the presence of pathogenic spores and prevent their growth.
All contaminated materials as well as areas that the sewage water has penetrated must be examined for porosity. This materials or items must be classified as: non-porous, semi-porous and highly porous. Non-porous materials should be cleaned and disinfected according to the prescribed steps for sewage damage cleanup and must be restored to their original state.
For semi-porous materials such as drywalls, wood and plaster – the sewage damage cleanup procedure requires extensive cleaning and disinfecting because if the process of decontamination is not properly done, these materials could be sources of fungi and microbial growth that may cause health related problems later. As for the high porous materials like carpets an cushions – this must be removed and discarded and should not be restored since the replacement value of such materials are lower that their restoration costs. And it would be hard to restore them to their original physical state. Thus, it could become a habitat for pathogenic organisms.
Removing the raw sewage materials, mud and silt brought about by the sewage backflow must be done by using wet vacuums, shovels and moisture extracting machines such as dehumidifiers. Sewage damage cleanup for organic materials that are wedge between cracks and crevices should be removed through pressure washing with a disinfectant mixture, which must be removed immediately to avoid seepage of contaminants into other materials that are porous.
To make a sewage damage cleanup effective after cleaning, disinfecting, rinsing and drying, a second application of disinfectant should be applied to destroy the pores of pathogenic elements accidentally left during the first round of disinfecting process.
Beth Olignerf is an article writer for Atlanta Sewage Damage Cleanup and Phoenix Sewage Damage Cleanup
Article Source: ArticleSpan
Nancy – GotSmog.com – The Pollution-Reducing Blog
0 comments
Leave a comment
Read more
« McCain, Udall Tour RMNP, Hear About Global Warming
Letters: ‘Unstoppable Global Warming’ – Las Cruces Sun-News »